ISSC M-22 Airsoft GBB Pistol by WE-Tech - CO2

GBB, NBB, CO2, RPG launchers, Gas Grenades and Shells

Moderator: redbull

Post Reply
User avatar
Keeper
Posts: 158
Joined: Fri Feb 22, 2013 6:13 pm
First Name: Donald
Last Name: Swelgin
Location: Shavertown, Pa
Contact:

ISSC M-22 Airsoft GBB Pistol by WE-Tech - CO2

Post by Keeper »

CO2 and Green Gas Versions look pretty cool. Only thing that gets me is the FPS listed for both the CO2 and Green Gas versions is 280-300. CO2 is known to have a hotter FPS then green gas. Maybe just a typo on EVIKE's end, but anyone have experience with this gun yet?

Both listed at $104.00
CO2 - BLACK
http://www.evike.com/products/45330/
CO2 - TAN
http://www.evike.com/products/45331/


Both listed at $100.00
GREEN GAS - BLACK
http://www.evike.com/products/45328/
GREEN GAS - TAN
http://www.evike.com/products/45329/

Image
Image
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm

User avatar
Keeper
Posts: 158
Joined: Fri Feb 22, 2013 6:13 pm
First Name: Donald
Last Name: Swelgin
Location: Shavertown, Pa
Contact:

Re: ISSC M-22 Airsoft GBB Pistol by WE-Tech - CO2

Post by Keeper »

I am told that this Pistol will also take APS ACP Co2 mags. i have one on order to test in the gun for function.
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm

User avatar
Keeper
Posts: 158
Joined: Fri Feb 22, 2013 6:13 pm
First Name: Donald
Last Name: Swelgin
Location: Shavertown, Pa
Contact:

Re: ISSC M-22 Airsoft GBB Pistol by WE-Tech - CO2

Post by Keeper »

After getting two ASP ACP mags, I found they do not work in this pistol (Contrary to what I was told). I did snag a Boneyard APS ACP for a song and all the mags work. One mag does not hold the slide open when it is out of BBs, so that must have been why the owner did not like it. Works great!

Image

User avatar
Keeper
Posts: 158
Joined: Fri Feb 22, 2013 6:13 pm
First Name: Donald
Last Name: Swelgin
Location: Shavertown, Pa
Contact:

Re: ISSC M-22 Airsoft GBB Pistol by WE-Tech - CO2

Post by Keeper »

As far as the mags for the ISSC M-22 itself, they are horrible. Decent looking Pistol itself and when you can get a Co2 cart in the gun it works great.

Image


Reason for the issue is plain to see here. The end Cap has a hole right through and this allows the CO2 cart to come up into the hole to the point that a Allen Wrench will not fit in the hole. You can not turn the end cap on to tighten it so the Cart can be punctured.
Image

What I did is grind a slot in the mag end cap and then put some JB Weld on it to make a slot. Works ok to get the end cap on and off (somewhat).
Image
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm

Post Reply