The gun is brand new, but is just not firing. I can pull the trigger, but the gun makes no noise (meaning I can't hear the gearbox) and does not fire. I have checked whether it is a battery issue, it is not. I have checked whether it is a fuse issue, it is not. Any ideas?
I'd like to have a few ideas before I go to have it professionally repaired as that way I don't have to pay for diagnostics. I would have tried to to repair it myself if it was a plain old AEG, but it's an EBB which means I'd have absolutely no clue what I'm doing. . .
CYMA CM046 not shooting
Moderators: JuiceWizard, redbull
CYMA CM046 not shooting
Callsign / Nickname : Misha / Миша
-
- Posts: 74
- Joined: Sun Mar 18, 2012 6:59 pm
- First Name: Anthony
- Last Name: Pietropaolo
- Location: Bronx, NY
- Contact:
Re: CYMA CM046 not shooting
Take an electrical tester, set it for continuity and attach the positive and negative where you would connect the battery. Pull the trigger and you should get continuity. If not its your trigger contact.
Bring your best or get DELTWIT!
Re: CYMA CM046 not shooting
Check the fuse...
Re: CYMA CM046 not shooting
The second thing I tried.Sinner wrote:Check the fuse...
Callsign / Nickname : Misha / Миша
- Shogun Mitsu
- Site Admin
- Posts: 765
- Joined: Wed Mar 09, 2011 11:18 am
- First Name: Angel
- Last Name: Sosa
- Location: Yonkers, New York
Re: CYMA CM046 not shooting
Disconnect your motor & re-connect it before anything, sometimes the connectors become loose.
~STRENGTH & HONOR~
NYCAirsoft.com the definitive guide to airsoft for NYC, connecting airsoft players in New York, New Jersey, Pennsylvania, Connecticut and around the world.
ACCOUNT VALIDATION INSTRUCTIONS
viewtopic.php?f=68&t=379
NYCAirsoft.com the definitive guide to airsoft for NYC, connecting airsoft players in New York, New Jersey, Pennsylvania, Connecticut and around the world.
ACCOUNT VALIDATION INSTRUCTIONS
viewtopic.php?f=68&t=379