G&P Magpul Receiver Help!!
Moderators: JuiceWizard, redbull
- Paolo814
- Posts: 5
- Joined: Sat Oct 27, 2012 6:32 pm
- First Name: Paolo
- Last Name: Locsin
- Location: Brooklyn, New York
- Contact:
G&P Magpul Receiver Help!!
Hey guys, I have gotten myself a http://www.evike.com/product_info.php?products_id=31339, I bought the g&p receiver reinforced parts with it and the selector switch is like tight, and the gold pin for it is also weird, also the forward assist pin wont fit,either ,anyone who could help me assemble it over the Internet via video chat would be great, thanks
[color=#0000FF]-Boom, Boom, Pao!![/color]
Re: G&P Magpul Receiver Help!!
When you say the pin is weird what does that mean? post pics please.
have to be more descriptive than saying it's "weird"... what's the gold pin? what's weird about it.
I have the same g&p body(magpul minus the Vltor upper) but in the GBB variant. the selector switch was tight at first but needed to be broken in. I just used a rubber mallet or an equally soft blunt object and smacked the selector to get it to rotate.
the pin for the forward assist needs to be hammered in. get an armorers hammer or a similar small light hammer and lightly tap it in. I'm sure there are vids on youtube that show how to assemble an AEG body.
have to be more descriptive than saying it's "weird"... what's the gold pin? what's weird about it.
I have the same g&p body(magpul minus the Vltor upper) but in the GBB variant. the selector switch was tight at first but needed to be broken in. I just used a rubber mallet or an equally soft blunt object and smacked the selector to get it to rotate.
the pin for the forward assist needs to be hammered in. get an armorers hammer or a similar small light hammer and lightly tap it in. I'm sure there are vids on youtube that show how to assemble an AEG body.
- Paolo814
- Posts: 5
- Joined: Sat Oct 27, 2012 6:32 pm
- First Name: Paolo
- Last Name: Locsin
- Location: Brooklyn, New York
- Contact:
Re: G&P Magpul Receiver Help!!
The pin for the forward assist doesn't fit,and the selector with the gold pin is top lose or too tight, scratching the reciever -_- it's like slanted with the pin installed ill post pic hen I'm off my iPad
[color=#0000FF]-Boom, Boom, Pao!![/color]
- Shogun Mitsu
- Site Admin
- Posts: 765
- Joined: Wed Mar 09, 2011 11:18 am
- First Name: Angel
- Last Name: Sosa
- Location: Yonkers, New York
Re: G&P Magpul Receiver Help!!
Usually, with a new reciever the paint or anodizing will make everything very snug. I use an extra fine grit sandpaper & knock down the coating a a tiny bit at a time, just until what goes into that part just fits snuggly. Like Willis said, in time it will loosen up, but if you take off too much of the coating it will get very loose over time. Take your time & let the tools work for you, not against you.
~STRENGTH & HONOR~
NYCAirsoft.com the definitive guide to airsoft for NYC, connecting airsoft players in New York, New Jersey, Pennsylvania, Connecticut and around the world.
ACCOUNT VALIDATION INSTRUCTIONS
viewtopic.php?f=68&t=379
NYCAirsoft.com the definitive guide to airsoft for NYC, connecting airsoft players in New York, New Jersey, Pennsylvania, Connecticut and around the world.
ACCOUNT VALIDATION INSTRUCTIONS
viewtopic.php?f=68&t=379