I was working on a G&G Combat Machine with missing screws in the RIS for a team mate. I was able to make that solid with some new allen screws and tightening the delta ring. I then went to test fire the gun only to find I could not fill the mags with BBs. The BBs would go in and come right out. I noticed the follower was coming way out. Below are pictures of the mags with Red Arrows pointing at the mag feed lip and what looks like a missing part.
*Note that it is missing off both mags and I am not sure if I lost that or I was given the mags this way.
It looks like a piece is missing on the feed tube. As I have limited experience with Gas Mags, would this be a 'Closed Bolt' mag? Can spare parts be bought to fix this? I am currently abusing Mark Twain on here for help, but any other ideas would be helpful.
Sorry for the large images.
Need Some help on Gas Mags
Moderators: JuiceWizard, redbull
- Keeper
- Posts: 158
- Joined: Fri Feb 22, 2013 6:13 pm
- First Name: Donald
- Last Name: Swelgin
- Location: Shavertown, Pa
- Contact:
Need Some help on Gas Mags
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm