DE UMP M89 Parts

Advice on maintenance, problems and repair

Moderators: JuiceWizard, redbull

Post Reply
User avatar
Keeper
Posts: 158
Joined: Fri Feb 22, 2013 6:13 pm
First Name: Donald
Last Name: Swelgin
Location: Shavertown, Pa
Contact:

DE UMP M89 Parts

Post by Keeper »

I picked up a pair of DE UMP M89s for a steal. One is stock still in the Sealed box and shoots decent. The other is a Boneyard one with some issues. The Gun originally would not go into SEMI or FULL and when it did, would not turn the motor with any battery except a 11.1v Lipo. Motor would get major hot. Once removed, the motor seemed to barely turn (Not a torque motor). The Motor and Bucking/Nub were replaced and the gun is working, but I did find a broken part shown below which basically is the safety. The gun works great and goes into SEMI and FULL, but has no safe and will fire on SAFE without that part shown below.

I can not seem to find something similar to replace this broken part. Any help appreciated.


Image
Image
Image
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm

Post Reply